- Water
Jetting
Direction adjustment on four back jets and two foot jets. There are four direction control side jets with speed control that can be turned down low to allow for a much more robust foot and back massage. The water jetting system runs through an automatically activated heater where the thermostat is set at 104°. While this heater is mainly designed to maintain the water temperature, it will slowly increase as the jets continue to run. - Air Jetting The super quiet air blower is fitted with variable speed control for total enjoyment and is handheld remote control activated. The twelve individual air injectors in the floor will bubble up around your legs and body, soothingly caressing your skin as they rise. Activating the air blower for about a minute before entering the tub can be a good idea for heating up the bubbles. While the air is warmed, it can still feel slightly cool when the bubbles first touch the skin. The sensation still feels fabulous.
- Air Jet Positions The jets are positioned in the floor of the tub, this offers a very pleasant sensation for the legs and body. Also, even on the highest power, the bubbles will not splash over the edge of bathtub.
- Hygiene and Ozone Sanitizing The water jetting system is fitted with an ozone sanitizer. This converts the oxygen on the water to O3 and this kills and prevents bacteria build up,For improved hygiene, each air jet is fitted with a backflow preventer which stops water from entering the warmed air supply system. The air jetting system has an automatic purge cycle that activates 20 minutes after being switched off, running for 2 minutes, to dry out the air lines.
- Chromotherapy
Underwater Lighting
With the choice of seven different colors, the chromotherapy lighting really sets the mood and ambience in a darked bathroom. Choose a color to suit you mood and relax. - Fittings
Position
The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All fittings are contained within the cavity in between the shells. - Bath
Salts and Bubble Bath
It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface. - Care
and Maintenance
Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives. - Recommended
Quarterly to Half-Yearly Maintenance
To maintain excellent hygiene, we strongly recommend the
following preventative maintenance be carried out each 5-6 months.
- Fill
you tub with warm water to 2" above the top jet.
- Add
two cups of household bleach.
- Activate
all the jets on in the fully open position.
- Allow
the jets to run for 15 minutes.
- Switch
the jets off and allow the water to sit for 15 minutes.
- Empty
the tub.
- Re-fill
with fresh water, again 2" above the top jet.
- Run
the jets for 15 minutes.
- Empty
the tub and the job is finished.
- If
the tub is not in constant use, it is still very important to continue
the maintenance as described herein.