SanSiro Marseille W73VG 73 Inch Water Jetted Verdigris Aged Copper Shell French Bateau Bathtub with 3/4" Thick CoreAcryl Acrylic Interior
- Water Jetting
Direction control on four back and two foot jets, variable speed and direction control on four side jets. - Jet Pressure Control Higher pressure on the back and foot jets can be achieved by turning the flange on the variable speed side jets and lowering their output.
- Fittings Position The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells. The verdigris copper exterior is lacquered and will not patina any further. Any marks should be removed using a soft, damp cloth.
- Bath Salts and Bubble Bath
It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface. - Care and Maintenance
Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives. - Recommended Periodic Maintenance
- To maintain excellent hygiene, we recommend the following preventative maintenance be carried out each 3-4 months.
- Fill you tub with lukewarm water to 2" above the top jet.
- Add one cup of household bleach.
- Activate all the jets in the fully open position.
- Allow the jets to run for 15 minutes.
- Switch the jets off and allow the water to sit for 15 minutes.
- Empty the tub and lightly rinse inside.