67" x 32" Air Jetted Tub “Calypso Pisces 67ACHAir” CoreAcryl Acrylic in Aged Chrome Finish
Pro Tip for Warmer Bubbles Turn on your air blower while the tub is filling - it's completely safe for the equipment. By letting it run while the tub fills, the air warms up by more than 20 degrees, delivering bubbles at a cozy 105°F.
No Remote Parts - All Built-In
For scale - mannequin inside the tub in the photo is 5'8" tall
Fabulous Aged Chrome Finish on the exterior shell of the tub
Construction - CoreAcryl interior with reinforced acrylic exterior shell
Comfort & Operation
Super quiet 0.5hp warmed air blower
Variable speed heated air bubbles - from soft to strong
Automatic self-purge cycle on air system
Waterproof remote control
12 air jets with backflow prevention on the tub floor
No visible or external jetting parts
All jetted fittings housed between the tub inner and outer shell
All jets are supplied in white to match the bathtub
Hygiene & Maintenance
High gloss 'Easy Clean' slip resistant floor
Installation & Requirements
High gloss white 'Firm Touch" drain matches tub floor finish
This tub requires one standard 15amp-110volt GFCI connection
Air Jetting The super quiet air blower is fitted with variable speed control for total enjoyment and is handheld remote control activated. The twelve individual air injectors in the floor will bubble up around your legs and body, soothingly caressing your skin as they rise. Activating the air blower for about a minute before entering the tub can be a good idea for heating up the bubbles. While the air is warmed, it can still feel slightly cool when the bubbles first touch the skin. The sensation still feels fabulous.
Jet Positions
The jets are positioned in the floor of the tub, this offers a very pleasant sensation for the legs and body. Also, even on the highest power, the bubbles will not splash over the edge of bathtub.
Hygiene
For improved hygiene, each jet is fitted with a backflow preventer which stops water from entering the warmed air supply system. For additional hygiene the air system is programmed with an automatic purge cycle that runs for 2 minutes after being the air blower is disengaged.
Fittings Position There are no remote fittings on the tub, everything is encased within the tub body. The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts.
Bath Salts and Bubble Bath It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
Care and Maintenance Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
Key Specifications
Key specifications for 67" x 32" Air Jetted Tub “Calypso Pisces 67ACHAir” CoreAcryl Acrylic in Aged Chrome Finish
