Clawfoot Tubs

Explore clawfoot tubs ranging from compact 53-inch models to spacious 75-inch designs, with traditional soaking, air-jetted, whirlpool, and combination hydrotherapy options. Our collection includes classic roll-top, slipper, and double-slipper silhouettes made from substantial CoreAcryl acrylic, with white and decorative exterior finishes available on selected models. Compare the exterior dimensions, interior bathing space, jetting features, and finish options to find the right clawfoot bathtub for your bathroom and preferred bathing experience.

Skip to results list
36 items

Filter

Acrylic vs. Cast Iron Clawfoot Tubs: Heat Retention

When comparing clawfoot tubs, material can affect how quickly the tub absorbs heat from the bathwater. We compared a CoreAcryl acrylic clawfoot tub with a similarly sized cast iron tub.

Clawfoot Tub Heat-Retention Test

Both tubs were filled with the same amount of 134°F water. Temperatures were measured over 25 minutes in a 65°F room.

Water temperature comparison for acrylic and cast iron clawfoot tubs, measured in degrees Fahrenheit
Tub material Fill water 0 min 5 min 10 min 15 min 20 min 25 min
CoreAcryl acrylic 134.0 129.2 122.4 120.1 117.2 113.8 109.2
Cast iron 134.0 125.7 118.3 115.5 112.3 107.9 103.3

Which Clawfoot Tub Retained More Heat?

After 25 minutes, the CoreAcryl tub measured 109.2°F and the cast iron tub measured 103.3°F. In this comparison, the acrylic clawfoot tub retained a water temperature 5.9°F higher.

You can read our full write up on the test, Heat Retention of Acrylic vs. Cast Iron here.

Choosing a Clawfoot Tub Style

The shape of a clawfoot tub affects more than its appearance. The rim height, backrest shape, and location of the raised ends influence how the tub feels when reclining and how it fits within the bathroom. Exact bathing-well dimensions and drain locations vary by model, so compare the individual product specifications before choosing.

Classic Roll-Top Clawfoot Tub

A classic roll-top tub has a traditional rolled rim and a balanced vintage profile. Depending on the model, one or both ends may provide a reclining surface. This style is a good starting point for shoppers who want a traditional clawfoot bathtub without the more pronounced raised ends of a slipper design.

Single-Slipper Clawfoot Tub

A single-slipper tub has one raised end designed to support the back and shoulders while reclining. The asymmetrical silhouette also creates a strong focal point in the room. Check which end contains the backrest and where the drain and faucet will be positioned before finalizing the bathroom layout.

Swedish Slipper Clawfoot Tub

An elegant evolution of the single slipper tub with a flowing shape.

Double-Slipper Clawfoot Tub

A double-slipper tub has raised reclining ends on both sides, creating a symmetrical shape and a more enclosed bathing position. Because these designs are often larger, compare both the exterior footprint and the interior bathing space rather than relying on overall length alone.

French Bateau Clawfoot Tub

An elegant evolution of the double slipper tub with flowing lines.

Double-Ended Clawfoot Tub

A double-ended tub generally provides similarly shaped ends on both sides, often with the drain positioned toward the center. The rim is typically less elevated than on a double-slipper design. Always confirm the drain location and interior shape for the individual model.

To get a clearer sense of interior space and reclining position, compare tub sizes using our body-height examples.

Choosing the Right Clawfoot Tub Size

A clawfoot tub should fit both the bathroom and the people who will use it. Exterior dimensions determine whether the tub fits the available space, while the interior bathing well, backrest shape, overflow depth, and water capacity influence how the tub feels in use. These details vary by model, so review the specifications and installation information for the individual tub before ordering.

What to Confirm Before Choosing a Tub

  • Available floor space: Measure the tub location and allow appropriate clearance for plumbing, cleaning, and movement around the tub. Pay attention to the distance to other fixtures (toilet, vanities etc.) as there is typically a minimum clearance dictated by building or plumbing code.
  • Delivery path: Confirm that the tub can pass through exterior doors, hallways, stairways, and bathroom doorways. All of our clawfoot tubs have removable feet which can make getting them through tight spaces a bit easier.
  • Interior fit: Compare the bathing dimensions, not just the overall length of the tub as some tubs of the same length are more spacious than others.
  • Water depth and capacity: Review the overflow depth and water capacity as some tubs of the same size are deeper than others.
  • Faucet placement: Determine whether the selected model accommodates a rim-mounted faucet or requires a freestanding or wall-mounted faucet. We offer pre-installed faucets on our tubs that accommodate deck mounting, but keep in mind that you may need to remove this faucet if you need to bring the tub through a door sideways.
  • Faucet drilling: We will pre-drill faucet holes on deck mounted tubs to your specification if you like, or your builder can drill them on site.
  • Drain and overflow: Confirm the drain location on the tub is suitable for your installation. All of our clawfoot tubs are reversible, so you can place an end drain on the left or right side of your space. Calypso and SS/EM tubs have built in overflows and do not need any additional pieces, HL tubs require an external overflow pipe.
  • Floor support: Consider the combined weight of the tub, water, and bathers. Consult the installer or contractor when floor capacity is uncertain.

Please refer to specification sheets and installation documents as the authoritative source for the selected model. If you are uncertain about sizing, faucet compatibility, or plumbing requirements, contact us before ordering.

Soaking and Jetted Clawfoot Tub Options

Clawfoot tubs are available for traditional soaking as well as several types of hydrotherapy. The best choice depends on the bathing sensation you prefer and the level of system maintenance you are comfortable performing. Available configurations vary by model.

Comparison of soaking and jetted clawfoot tub systems
Tub system Bathing experience Maintenance considerations
Non-jetted soaking tub Quiet, traditional soaking without powered massage Normal bathtub cleaning; no internal jet lines
Air-jetted tub Gentle, widespread bubbles and a lighter full-bath massage Generally lower maintenance than a water-jetted system; follow the care instructions for the selected model
Whirlpool water-jetted tub Stronger, more targeted water massage Internal water lines require periodic cleaning according to the tub manual
HydroSpa air-and-water-jetted tub Choice of air bubbles, targeted water massage, or both systems together Maintenance includes the water-jet system; follow the instructions supplied with the tub

Browse clawfoot and pedestal jetted tubs, or read our bathtub buyer’s guide for a more detailed explanation of the available hydrotherapy systems.

Clawfoot Tub Feet, Finishes, and Faucets

The feet, exterior finish, drain trim, and faucet can substantially change the appearance of a clawfoot tub. Available combinations vary by model, so treat each product page and installation document as the authoritative source for compatible options.

Feet and Decorative Finishes

Selected tubs are available with different foot styles, metal finishes, or decorative exterior treatments. When coordinating a bathroom, consider how the feet relate to the faucet, drain, overflow, and other visible hardware. Custom or artisan finishes may also affect pricing and lead time.

Faucet

We offer our Victoriana freestanding or deck mounted faucet with all clawfoot tubs in a variety of finishes. This vintage style faucet pairs well with all the tubs and should be at home in any vintage or transitional setting. We also offer a selection of Waterlands Freestanding faucets on many tubs, these more modern designs can still pair excellently with a clawfoot tub particularly in a transitional or eclectic style bathroom.

See our selection of freestanding, deck-mounted, and wall-mounted tub faucets.

Confirm Compatibility Before Ordering

Because drilling, drains, overflows, and trim options are model-specific, confirm the complete configuration before purchasing the tub and fittings. If you need assistance matching components, contact Baths of Distinction with the tub model and preferred faucet arrangement.

Clawfoot Tub Frequently Asked Questions

What size clawfoot tub should I choose?

Choose a tub that will fit in your space firstly, and keep in mind that some tubs are deeper or more spacious than others of the same length. If you have a large space available, consider that you may not actually want the largest tub you can fit depending on your height. If you are shorter, particularly for people below 5'4" your feet may not reach the other side of a large tub and you will not be able to support yourself with your legs while you sit in the tub which is usually uncomfortable. Please don't hesitate to contact us if you are unsure.

What is the difference between a roll-top, slipper, double-slipper, and double-ended clawfoot tub?

The roll-top, sometimes referred to as a classic style or classic shape tub and the double-ended tub are both flat topped. This is primarily an aesthetic preference. Single and Double Slipper tubs have a curved shape, which allows the part of the tub where your back rests to be longer and typically supports your head better, while the center or low end of the tub remains low to avoid making it impractically tall to step over. Slipper shapes are typically more comfortable, but Flat shapes can usually be made comfortable with a pillow as well.

Can a clawfoot tub have air or water jets?

We offer air and water jetting on our SanSiro/Empress line of tubs, where the jetting components are fully concealed within the tub. We don't offer jetting on our standard clawfoot tubs, but we do offer air jetting on the pedestal versions of these tubs where the jetting components can be concealed inside the pedestal.

What type of faucet works with a clawfoot tub?

Clawfoot tubs naturally pair well with vintage style faucets but many of our tubs also go surprisingly well with modern freestanding faucets especially if your bathroom is not strictly traditional. Check on the tub you like to see if it is possible to use a deck mounted faucet, otherwise you will need to use a freestanding faucet.

Does a clawfoot tub require additional floor support?

Unfortunately the only simple answer to this question is that it depends on your floor and someone qualified must inspect it and make the determination. Most modern buildings can support the weight of a filled acrylic clawfoot tub without modification, but you should pay especially close attention to this in old buildings where it is common that floor joists were too small or overspanned by modern standards even if they are still in good condition. If your floor is a concrete slab, there is typically little concern that the tub would overload it. Likewise if you are replacing a cast iron tub or some other heavy tub, if the floor supported the old tub with no issue there is not likely to be an issue with your new tub.

Do acrylic clawfoot tubs retain heat well?

Yes, in fact by our testing they retain heat better than cast iron tubs in many conditions. For the ultimate in long soaks though, we recommend a water heater which is available on our SanSiro and Empress line of tubs. This will keep your bath warm as long as you like without needing to add new water.

How are clawfoot tubs delivered and installed?

Because clawfoot tubs are large they are shipped via LTL (Less than Truckload) freight, which basically means the tub will be delivered by a larger truck than normal and dropped off at your curbside, in your driveway or sometimes can be placed into an easily accessible garage. Once you get your tub and unpack it, most acrylic tubs are easy enough for two people to lift and move around to the final installation site.