Submit search
Download Specification Sheet (JPG, 234kB) Download Installation & Care Manual (PDF, 355kB)
Experience the perfect blend of vintage elegance and modern luxury with this beautifully crafted single slipper clawfoot bathtub. While embracing a classic design, it features cutting-edge technology for an indulgent bathing experience.
Key Features:
Water Jetting: Enjoy customizable comfort with direction and speed adjustable foot and side jets, along with direction controls for four back jets, allowing you to tailor your massage experience.
Water Speed & Pressure Control: Fine-tune your relaxation by adjusting water pressure. Higher pressure for the back jets can be achieved by turning the flange on the variable-speed jets, while you can easily reduce output as desired.
Discreet Fittings Position: Maintain the classic look of your bathtub with a double-shell design that hides all fittings and jetting components between the inner and outer shells, preserving its timeless aesthetic.
Bath Salts & Bubble Bath Friendly: Feel free to enhance your soak with bath salts or bubble bath. Just ensure salts are fully dissolved before use to prevent any damage to the tub surface.
Easy Care & Maintenance: The high-gloss acrylic finish is simple to maintain—just wipe it down with a soft cloth and mild liquid soap for a lasting shine.To complete this luxurious package, we include a premium British Telephone-style bathtub faucet, available in your choice of finish. If you prefer not to use the deck-mounted faucet, simply select the option to exclude it from your order in the customization table.Available Options:
SanSiro Jetted Tubs - Electrical Cord Position on Tub
All of the jetted tubs in the SanSiro range use a 3' long cable 110v – 15-amp standard 3 pin plug. You have choices as to where you would like the plug on the jetting system to connect to the GFCI outlet in your home.1 - Leave the connection under the tub. In this case, you would need to have your GFCI at the control board and not on the plug under the tub.2.- Connect to a wall socket GFCI. You can drill holes in the outside of the tub and run the electrical cable to a wall mounted GFCI near the tub.3 - To drill the holes, we recommend first drilling the 1/8” (bit supplied) pilot hole and then the hole saw supplied. If you have two plugs, drill two holes.4 - You can then feed the cord through the hole(s) and attach the rubber grommet. This grommet fits around the inside of the hole to prevent a rough tub edge rubbing on the electrical cord.Just in case you need it, we include an additional 3’ long extension cord for each plug on the tub.See or print photo directions